![]() ![]() ![]() hdmi_mode, hdmi_group, hdmi_edid_file etc settings in config.txt can no longer be used to work around display issues.The additional DVB drivers are not present.No solution for now, Hyperion doesn’t support the new graphics driver stack yet Solution: Change resolution in system settings (1920x1080 50 or 60Hz plus setting up whitelist and enabling “Adjust display refresh rate” in player settings is recommended) Kodi runs in 4096x2160 instead of 3840x2160 on 4k TVs after fresh installation.10/12-bit video output isn’t implemented yet, 10-bit video is displayed in 8 bits.50/60fps H264 HW decoding may need force_turbo=1 or core_freq_min=500 in config.txt to avoid AV-sync-issues/skipping.4K50/60 output is supported by the driver, but has some known issues (eg “no signal” when TV is put into standby and back on).Possible workaround: disable HW video decoding (“DRM PRIME decoder” in player settings), this works mostly fine for SD content (eg DVDs) No deinterlacing with HW video decoders.NEW: HD audio passthrough (Dolby TrueHD, DTS HD).Overall, the current version is properly useable. There is a lot that properly works, but keep in mind this is still brand new. Drivers for RPi2 and 3 are currently not yet feature complete and stable.Support for RPi0-1 is dropped, its unlikely to return (lacking horsepower for the new graphic stack).The RPi graphic drivers are still in progress of a complete rewrite, additionally the current developement is focused on RPi 4. There are no Raspberry Pi 0-3 releases for LE10.0. RPi4 splash is not shown on HDMI0 if HDMI1 is connected.RPi4 “no signal” after bringing TV out of standy in 4kp50/60 mode.RPi4 HDMI screen turns off when sustained high CPU usage. ![]() RPi4 lockup of playback/kodi after n plays on repeat.The RPi4 is also in good shape but the codebase is rather new, so it is not polished yet (keep reading for details). We can offer stable and good working versions for Allwinner, Generic and Rockchip devices. LibreELEC 9.2 setups will not be automatically updated, you will need to manually update. Users of LibreELEC 10 Beta or RC1 get an automatic update to the final version. The final version of LibreELEC 10.0.1 has been released, bringing Kodi (Matrix) v19.3 to LibreELEC users. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |